![]() Go to Select Disk and select the Time Capsule.Share disks over Internet using Bonjour: (NOT checked)Ĭonfigure client access to Time Capsule Time Machine.Airport Disks Guest Access: not allowed.Secure Shared Disks: With Disk Password, then set the password.(if you want to store data on only it, or backup from Windows clients) Go to Airport > Wireless and turn it off.No data will be deleted and you keep previous settings, fix them, and then reapply. If you are connecting via radio and you turn it off, you will not be able to connect to the Time Capsule after restart! If you do this you will have to do a hard reset. Make sure the static IP settings have been applied and you are connecting to it over Ethernet. Make sure static IP settings are applied! Confirm that the static IP address settings have been applied.Wireless Sharing should be set to off.Enter the IP address, Subnet, Router Address (aka Gateway), DNS servers provided to you from your static IP setup.Use Apple's Airport Utility Version 5.3 or later to configure the Time Capsule using "Manual Setup mode." Helpdesk consultants can see this article for information on how to. Request a reserved IP address and hostname using the Request 1-4 IP Address form. We are not very interested in a hostname for the Time Caosule at the current time (perhaps for features beyond time machine compatibility), but we want a static IP address. Help staff can use this link to look up the MAC to see if it is registered. ![]() As a client on the MIT wired network Register the device for use on the network However, this configuration is designed for small home networks and it is not for use in enterprise networks, such as the network here at MIT. This is the default configuration, which Apple recommends. This is against the MITnet Acceptable Use policy because it adds to network congestion, and makes you responsible for anything that happens when anyone uses your network. As an access pointĭO NOT USE the Time Capsule as an access point to the MIT network. However, users who do not know how to set up the device may find themselves in this mode. In addition, if you set it up as a separate wireless network, your computer may also switch back and forth between MIT's network and the Time Capsule's network automatically, leading to confusion. Setting up the Time Capsule as an independent wireless network is strictly forbidden, as wireless broadcasting is not allowed at MIT due to the potential for interference and the disruption of MIT sanctioned wifi networks. The downside is that you will have to disconnect from the internet and connect to the Time Capsule to backup, making your computer unable to access the internet or the MIT network during this time. You could use a Time Capsule independently from MITnet if you just wanted to use it for backup. The best way to connect a Time Capsule to MITnet is through a wired Ethernet connection.We want to make sure that it is secure. ![]() It could be used as a wireless client to the wireless network, however wired is more reliable.The use of routers is strictly forbidden on MITnet. We want to make sure users are not using it as a router (nothing is plugged in to the 3 ports with arrows over them).We want to make sure users are not using it as a wireless access point (Wireless broadcasting is not allowed at MIT).Its 2 main features are a drive for backup and a wireless router. The Time Capsule can be configured in many ways. IS&T's officially supported software for backups can be found on their Backup page. ![]() Our offically supported method of backup is with Tivoli Storage Manager. This article is provided as a best effort for support. IS&T provides only limited support for Apple Time Capsules.Īt the current time, IS&T is only able to provide limited support in setting up and using Time Capsules on the MIT network.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |